Home » Service Areas » Kirby
When a renovation is on the table, or a new appliance is going in, or a detached garage is finally getting power, the electrical side of the job is the part that needs to be right before anything else moves forward. We handle that work for homes and properties throughout Kirby: new circuits, panel assessments, wiring upgrades, and the full range of repairs and installations that come with keeping a property running the way it should.
Call (830) 368-3665 to scope the job and get a price before anything is scheduled.
Kirby is a town of modest, established homes, and the electrical systems in those homes reflect when they were built and how they have been added to over the years. A homeowner adding a dryer circuit, a landlord preparing a property between tenants, a property manager dealing with a tripped breaker that will not hold: these are the calls we get, and they are the calls we are set up to handle. We work in Kirby and the surrounding area seven days a week, from 7:00 AM to 10:00 PM.
A vacant property is the easiest version of an electrical job. No schedules to work around, no belongings in the way, no occupied rooms that need to stay powered while work is underway in the panel. The gap between one tenant moving out and the next one moving in is the right moment to address the wiring issues that would otherwise mean cutting into walls around someone's furniture or shutting off circuits while someone is trying to work from home.
Access is arranged on the call. We confirm who has the keys, what the scope involves, and what the property needs before we schedule anything. Whether the job is replacing ungrounded outlets, adding a GFCI circuit in the kitchen or bathroom, running a dedicated circuit for a new appliance, or doing a full inspection before a new lease starts, the vacant window is the time to get it done cleanly.
If an inspection turns up something that needs attention before the property is rented again, we explain what it is, what it involves to fix, and what it will cost. The scope of the electrical work is priced before it starts, so the decision about what to address is yours to make with full information.
Electrical faults do not always show up at a convenient time. A breaker that will not hold, an outlet that has gone warm, a panel that is making noise: these are not situations to leave until next week. We take last-minute calls when the schedule allows, and we are available every day from 7:00 AM to 10:00 PM. Prompt response, even for last-minute electrical calls, is part of how we work.
For occupied properties, we work around the people inside them. That means confirming in advance which circuits will be affected, sequencing the work to minimize downtime, and making sure any essential loads stay live while the job is underway. A business that cannot afford to lose power to a point-of-sale system or a refrigeration circuit gets that conversation on the scheduling call, not on arrival.
When you call, we ask the right questions up front so the visit goes the way it should. Electrical problems don't wait, and neither do we, which is why scoping the job on the phone is how every booking starts.
A quote for electrical work is not a number pulled from a rate card. It is built from what the job actually involves: what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being asked of it.
A ceiling fan swap where the box and circuit are already in place is a different job from one where a new circuit has to be run from the panel. An outlet replacement on a grounded modern circuit is different from the same job in a house where the branch wiring is aluminum. What changes a quote is what the work turns out to require.
We scope the job on the call. You describe what you have, we ask what we need to know, and we give you a price before anything is scheduled. There are no layers between you and a straight answer. With a local company, a question about the work gets a straight answer.
A ceiling fan installation is straightforward when a rated box and a circuit are already there. When they are not, the job involves running a new circuit from the panel, installing a fan-rated box in the ceiling, and bringing the wiring to the right place. We handle both, including wall controls and remote wiring at the same visit.
An inspection is worth scheduling before a property changes hands, after a storm, or any time a home has not been looked at in years. We go through the panel, the branch circuits, the outlets, the grounding system, and the visible wiring, and we document what we find. The result is a clear picture of what the electrical system looks like and what, if anything, needs attention.
An outdoor outlet that is not properly enclosed is a hazard in wet weather. We install weatherproof GFCI-protected receptacles for patios, driveways, and exterior walls, with the right enclosure for the exposure. Code-compliant wiring and proper grounding and bonding are part of every outdoor installation.
A range, a dryer, a refrigerator, a hot tub, or an EV charger each needs its own circuit sized to the load. Running a high-draw appliance on a shared circuit is how breakers end up tripping and wiring ends up damaged. We run the circuit, size it correctly, and confirm the panel has the capacity before the work starts.
Outdoor lighting covers a wide range of work: wall-mounted fixtures, floodlights, motion sensors, and low-voltage landscape accent lighting. We run the circuits, make the connections, and leave the installation weatherproofed. Security lighting tied to a motion sensor or a timer is part of the same visit.
A detached garage or a shed that needs power requires a circuit run from the main panel, and depending on the load, a subpanel of its own. An electric gate needs a dedicated supply and a circuit that can handle the motor draw. We assess the existing panel capacity, run the supply, and install the subpanel where the load calls for one.
In the kinds of homes common in Kirby, the main panel is usually in the garage, a utility area, or on an exterior wall. Knowing where it is and having clear access to it is the single thing that makes a visit go faster than anything else.
If the panel is in a closet behind stored items, clearing a path before we arrive saves time on both sides. If it is in a garage, making sure the space is accessible matters too. We confirm panel location on the scheduling call.
Older homes sometimes have a main panel that has been added to over the years, with a mix of breaker brands or a subpanel that was installed without documentation. That is not a problem, but it is worth mentioning on the call so we arrive prepared. Panel and wiring work finished to code is how every job leaves the property. If the scope is still open, the list of electrical services we handle is the place to start.
Adding an EV charger, a workshop subpanel, a new HVAC supply circuit, or a bank of kitchen appliances all put new demand on a panel that was sized for something different. A 100-amp service that was adequate for a home as it was originally built often cannot carry what a modern household asks of it. Before we run a new circuit, we do a load calculation to confirm the panel has the capacity.
If the panel cannot carry the new load, a service upgrade is the path forward. We handle 100-amp to 200-amp upgrades, main panel replacements, and subpanel installations for outbuildings and additions. The calculation happens before the quote, so you know whether an upgrade is part of the job before any work is scheduled.
Whole-home rewiring is also on the table when the wiring itself is the issue rather than just the panel capacity. Knob-and-tube wiring and aluminum branch circuits are both found in older homes in this area, and both call for an honest conversation about what remediation or replacement involves. Arrives fast. Wires it right. A figure before anything starts.
We serve Kirby and the surrounding communities across Bexar County, including Windcrest, Terrell Hills, Alamo Heights, China Grove, and Converse. Residential and commercial properties across this part of the county are all within our range. If you are in one of these towns or nearby, call to confirm coverage for your address.
The same range of work applies across the area: repairs and troubleshooting, panel upgrades, wiring and rewiring, outlets and lighting, dedicated circuits, EV charger installation, backup generator hookups, and whole-home surge protection. Seven days a week, 7:00 AM to 10:00 PM.
We let you know during the visit if the scope is going to extend beyond the original estimate. The price for additional work is confirmed before we continue, not after. We schedule the continuation so the property is not left in an unsafe or unusable state overnight.
A partial or full rewire is typically staged by area to keep disruption manageable. We sequence the work so one section of the home is being worked on at a time, which means other areas remain usable. The exact sequence depends on the layout of the home and the wiring configuration. We walk through the plan before work begins.
Sometimes, yes. If the panel has open breaker slots and the total calculated load stays within the service rating, a new circuit can be added without touching the panel itself. When the panel is already at capacity or the service rating is too low for the added load, an upgrade is part of the job. We confirm which situation applies before any work is scheduled.
We coordinate directly with the other trades or with whoever is managing the project schedule. Electrical rough-in typically needs to happen before walls are closed, and final connections happen after cabinets and fixtures are in place. We confirm the sequencing on the call so the electrical work does not hold up the rest of the project.
We invoice per job. If you manage several properties and want work done at more than one, we schedule each separately and invoice each one individually. If you have a specific billing arrangement in mind, raise it on the call and we will confirm whether it can be accommodated.
An electrical safety inspection is the straightforward answer. We go through the panel, the branch circuits, the outlets, and the grounding system, and we give you a clear account of what we find. For a home that has not been inspected in years, or one that is changing hands, that inspection is the basis for any repair or upgrade decisions.
Call (830) 368-3665 to arrange one and we will confirm the scope and the price on the call.
A dryer requires a dedicated 240-volt circuit, typically 30 amps, with a four-wire connection that includes a separate neutral and ground. Standard 120-volt outlets run on a single hot leg and cannot supply the voltage or the current a dryer needs. We run the circuit from the panel and install the correct outlet for the dryer's cord configuration.
We handle homes, rental properties, and small commercial properties throughout Kirby. The town's housing stock includes a lot of established homes that were built with electrical systems sized for a different era of demand, and much of the work we do here involves bringing those systems up to what a modern household or business actually requires. Whether the property is owner-occupied, between tenants, or a small business premises, the process is the same: scope the job on the call, confirm the price, and schedule the visit.
Call (830) 368-3665 to describe the job and get a price.
We scope it on the phone, ask what we need to know, and confirm the figure before anything is scheduled. We handle electrical work across Kirby and the surrounding area, every day from 7:00 AM to 10:00 PM. Fast diagnosis. Pricing set out up front. Clean work.
We also take electrical work in: Alamo Heights, Live Oak, Castle Hills, Selma, Shavano Park. Have a look at our full list of towns.
Below is a breakdown of the electrical work we handle for homes and businesses in Kirby and the surrounding Bexar County area. Each service is scoped on the call before anything is scheduled, so you know what the job involves and what it costs before we set a date. Whether the need is a quick repair or a full panel upgrade, the process starts the same way: a call, a clear price, and work done right.
| Service | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Backup Generator Installation | Transfer switch installation, Generator circuit hookup, Manual and automatic transfer switch options, Load sizing for critical circuits | Homes in areas with storm-related outages or anyone needing power continuity | A proper transfer switch isolates the generator from the utility line. That step protects utility workers and your equipment during an outage. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Load calculation before any work starts, Service entrance replacement, Subpanel installation for garages and additions | Homes adding major appliances, EV chargers, or AC capacity | Panel upgrades require a permit and inspection. Permit filing and inspection coordination are handled as part of the job. |
| Ceiling Fan Installation | Fan mounting and wiring, New circuit runs where no wiring exists, Switch and remote control wiring, Replacement of existing fans | Rooms without existing ceiling wiring or fans that need replacing | Installing a fan where no ceiling box exists requires running a circuit from the panel. We handle that as part of the same visit. |
Call (830) 368-3665 to talk through what you need. We scope the job on the call, give you a price before anything is scheduled, and get to work when you are ready.